Page 3 - MM-590 Model catalog
P. 3
MM-590 Condenser and Dynamic Microphone
MM-590 Operating Instructions
Dynamic Microphone Condenser Microphone
Inserted the MU-59 dynamic Inserted the MU-90 condenser microphone
microphone capsule. Connect capsule. Connect the microphone cable to
the microphone cable to a mixer a mixer or amplifier. The using method is
or amplifier. External powers like the same as a MIPRO MM-90 condenser
phantom power or battery are not microphone. External powers like phantom
required. The using method is the power or battery are required. Switch one-
same as a MIPRO MM-59 dynamic level up (Phantom Power line indicator) or
microphone. Switch one-level up two-level up (Battery line indicator) both
(Phantom Power line indicator) or will have signal output.
two-level up (Battery line indicator) If mixer doesn’t have a phantom power,
both will have signal output. If a
battery is inserted and microphone simply insert a battery and switch two-level
up (Battery line indicator) for signal output.
is switched two-level up (Battery line The operating characteristics are the same
indicator) it will perform normally,
however, the battery life will be as using phantom voltage. Additionally, if a
battery is inserted, connected to mixer with
slowly drained.
phantom power and switch two-level up
(Battery line indicator) it will have normal
operation, however, the battery life will be
slowly drained.
Additional Features
● MM-590 accepts MIPRO interchangeable dynamic or condenser microphone capsule.
● No annoying “pop” noise when switched on.
● Performance is not affected from high frequency signal interference.
MM-590 Key Features and Specifications
MU-59 Dynamic Mic Capsule MU-90 Condenser Mic Capsule
Sensitivity: -48 dBV ± 1 dB V / Pa（0 dB=1 V Sensitivity: -46 dBV ± 1 dB V / Pa（0
open circuit voltage）| Frequency Response: dB=1 V open circuit voltage）| Self
50 Hz~18 kHz | Maximum SPL: 149 dB | Noise:< 19 dB SPL (A)| S/N:> 75 dB
Dynamic Range: 130 dB | Output Impedance: @ 94 dB SPL (1Pa) | Maximum Input
600 Ω ± 30% | Dimension: 51 Ø × 204 mm | SPL: 149 dB | Dynamic Range: 130 dB
Approx. Weight: 336 g | Output Impedance: 600 Ω | Phantom
Supply: 12~52 V DC | Dimension: 51 Ø
× 200 mm | Approx. Weight: 324 g
⊙ Connect the microphone
to the microphone input ⊙ Connect the microphone to
of the mixer: the mixer the input without phantom
phantom voltage at “ON”, power: Insert a single AA
and switch the power battery into MM-590, and
switch of the MM-590 to switch the power switch to
the first stage. the second stage.
